Roller Crusher, also known as sand making machine, would be the most trustworthy and productive equipment to crush the stones and is normally employed in mining and petroleum sector. Regardless of its high efficiency in heavy business, the efficiency of roller crusher may be affected by five aspects.
Firstly, the hardness in the material can influence the function of roller crusher directly. It’s fairly hard to produce sand with stuff which has a high stiffness. Besides, this kind of stuff will trigger damage towards the machine. As a outcome, the efficiency plus the capacity of sand generating will probably be weakened. So we ought to pay close attention for the material that we decide on.
Secondly, the physical components of material may perhaps affect the conveying method of the jaw crusher machine. If the raw material contains thin silt, this kind of component will grow to be sticky throughout the conveying process, therefore generating the process significantly much more complicated. In this respect, we must very carefully screen the raw material ahead of the entire process. Meanwhile, we’d greater separate the thin silt to cut down the negative impact it causes and guarantee the suitable functioning with the machine.
Thirdly, to some extent, the degree of fineness of material has an impact on the potential of sand creating, normally speaking, the greater the requirement of fineness, the lower the performance of machine. So careful program really should be produced according to unique requirement, but in most circumstances, we can set the degree of fineness at medium.
Fourthly, the degree of viscosity of material might shorten the longevity of a machine. Which is to say, the material with higher degree of viscosity will quickly get stick for the wall from the stone crusher, if not be removed in time, the machine might not be able to function appropriately. Since of this, we really should opt for material with lower degree of viscosity.
Lastly, the humidity degree of material may perhaps lead to clogging during the transportation course of action. When the material has a greater degree of moisture content material, clogging will occur in higher frequency. To solve this sort of difficulty, we’ve to help keep a tight control of the humidity degree of material. If the material is wet, we can dry it by means of sun exposure or air drying.
With an international advanced level, roller crusher has currently met the demand of lots of difficult jobs, essentially it has become indispensable for the improvement of heavy business, but to produce the top of it, we cannot neglect the factors mentioned above.